IPCC Specification for Base Materials for Rigid and Multilayer Printed Boards August Supersedes IPCB with Amendments. Slash Sheets. Isola laminate and prepreg materials are certified to IPC or IPC IPC, “Specification for Base Materials for Rigid and Multi-layer. IPC Specification for Base Materials for Rigid and Multilayer Printed Boards.
|Published (Last):||28 July 2011|
|PDF File Size:||5.14 Mb|
|ePub File Size:||14.16 Mb|
|Price:||Free* [*Free Regsitration Required]|
Each master roll shall be inspected at the beginning and end as a minimum. It is recognized that different test methods yield 16 When specimens are tested in accordance with Tablethe average maximum permittivity shall be as indicated in the applicable speci?
Similarly, having a particular Keyword in the header section, does not guarantee the acceptability of this material for a speci? Additional samples may be taken to satisfy the terms of the purchase order.
Title, number and revision letter of the speci? Date of manufacture date when the opc was impregnated. All labels shall remain securely affixed and legible during normal handling. Moisture Absorption, maximum 5. Adjacent edges shall be perpendicular within 0.
IPC-4101C: Specification for Base Materials for Rigid and Multilayer Printed Boards
For more information on membership in IPC, please visit www. Additional test s can be speci? To each of them, the members of the IPC extend their gratitude.
See IPC for speci? Valentin Tereshkin, Elma, Ltd. There is no minimum level of quali?
Types of acceptable markings are: Except as otherwise speci? When specimens are tested in accordance with Table and UL94?
Quantity unit of issue and dimensions. Focus on end product performance? There iipc many rounds of drafts sent out for review and the committees spend hundreds of hours in review and development.
Flexural Strength at Elevated Temperature, length direction, minimum End point or failure occurs when iipc conducting path is formed across the surface and the arc disappears into the material. When specimens are tested in accordance with Tablethe average ippc loss tangent shall be as indicated in the applicable speci?
Creases with exposed reinforcement are 15 mm [0. When certifying to multiple speci? Ink of non-corrosive types that shall remain legible during normal handling but readily removable prior to fabrication, which will not affect the physical or electrical properties of the base material.
IPCC: Specification for Base Materials for Rigid and Multilayer Printed Boards
Yoshiyuki Takeda, Hitachi Chemical Co. A record of those materials quali? The longest dimension of each foil indentation in a specimen shall be measured with a suitable reticule on a minimum 4X magni? In the Table August event of any con? Visual inspection may be carried out under ambient temperature and humidity conditions.
To assist those searches performed with the hard copy of this speci? Marco Scari, Isola Fabrics S. One set of test information for laminate 0. Just include spec information? Minimize time to market? For convenience, the laminate and prepreg requirements for materials of the like composition are on the same speci? In the example shown in 1. For alternate reinforcement types not covered by industry standards, requirements shall be as agreed upon between user and supplier. Typical examples of reinforcement designators are shown below: Additional testing required by the user shall be included in the purchase order.
No failure shall be allowed for any specimen tested. By such action, IPC does not assume any liability to any patent owner, nor do they assume any obligation whatever to parties adopting the Recommended Standard or Publication.
Ordering Data for Laminate Materials The gel time shall not vary from the nominal gel time more than speci? Other — — HB — Speci?
Each microsection shall be located at independent corners of the specimen and no closer than 25 mm [0. Surface Resistivity, minimum A.
All other foil — composite 2.
Table Property different Tg results. An allowance for the roughness of the treated side must be added to all values. The specimens shall be rinsed with a cold water spray rinse for? There is not more than one piece of residual surface metal after ip removal per 0.
Bow and Twist of Laminate Materials